BeeFrame Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BeeFrame is a simple 3D‑printed tool with elastic‑assisted reopening that makes lifting hive frames easy and smooth
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D‑printed frame grip is designed to make handling hive frames effortless. Thanks to its integrated elastic bands, the clamp automatically reopens, making its use smooth and natural.
Printing
No supports required
Print settings :
Layer height : 0.2 mm
Infill : 30% gyroid
Walls (Perimeters) : 3
Assembly
Insert the two clamp sides into each other and snap the small end cap in place (repeat this step twice).
Snap the small spacers onto each side of the clamp, making sure to align the printed guide marks on the parts.
Clip the two handles onto the clamp, as shown in the reference image.
You’re done, enjoy!
Tip: Ideally, use a large elastic band so you can loop it twice, which gives the clamp stronger reopening force