1 / 3
Tube cutter for 6, 8 and 10 mm nylon tubes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To make clean straight cuts in nylon tubes, 6, 8 and 10 mm diameter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
For my work I regularly need to make straight cuts in nylon tubing. This tool is much safer and more accurate than using a knife. It is also small enough to fit in your pocket.
Required hardware for assembly:
5x M3x6 hex head socket cap screws.
1x M3x10 hex head socket cap screw
7x M3 nuts
utility knife blade
Note: The M3x10 screw is used in the pivot point. A second nut is added as a locking nut.