1 / 8
HP Envy x360 15-bq100nd power button — zdjęcie 1
1 / 8

HP Envy x360 15-bq100nd power button

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improved power button for the HP Envy x360 15-bq100nd.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

Improved power button for the HP Envy x360 15-bq100nd.

The original power button has a fundamental actuation problem: the factory design applies force in the wrong direction relative to the dome inside the microswitch. As a result, the dome is not actuated properly and provides virtually no mechanical or tactile feedback.

With no clear feedback, users naturally press harder, eventually applying excessive force and damaging the button.

This improved design corrects the actuation force direction, restores proper tactile feedback, and prevents the need to over-press the button.

Switch used: Littlefuse C&K PTS636 3.5x6 12V DC (50mA).
Digikey P/N: CKN12301-ND

Important note: You need to Dremel down part of the chassis. Do this with the mainboard removed, as it will create microscopic metal particles that can short the board.

After Dremeling, use a vacuum cleaner to remove all debris. Solder the switch as shown in the images and add mod wires to connect it. For extra security, use 2K epoxy to secure the switch in place.

Tagi