1 / 3
AMD Wraith Prism Shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shroud / trim piece for a wraith prism cooler that sits outside the pc case.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Open Community License v1.1 + Micro Business v1
This is a very niche model, but I thought I would share it just the same. After upgrading the CPU in my little PC, the cooler was too big for the case. I decided to cut a hole in the lid and let it pop out of the top of it. I had to make one end of the hole bigger in order to slide the lid back into the lock position. The hole was terrible looking so I made this shroud or trim piece for it. I made it out of 95A TPU. So, if you need something like this - have at it.