Print-in-Place ADXL345 Bed Mount for Input Shaper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-in-place bed mount for securely attaching an ADXL345 accelerometer to the printer bed for Input Shaper calibration
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
ADXL345 Print-in-Place Bed Mount
A simple print-in-place mount for attaching an ADXL345 accelerometer to the printer bed when performing Klipper Input Shaper calibration.
The mount is designed to stay attached to the bed during the vibration test while keeping the ADXL345 securely positioned.
Hardware Required
ADXL345 accelerometer
2× M3×6 screws
Connecting wires for the ADXL345
Print Settings
Brim: Recommended - 20mm , 0mm object-brim gap
Orientation: Print as provided
Placement: Center of the bed
Installation
Print the mount with a brim.
Once printed, attach the ADXL345 to the mount using 2× M3×6 screws.
Connect the ADXL345 wiring.
Make sure the accelerometer is securely mounted and that the wiring cannot interfere with the moving parts of the printer.
Run your Klipper Input Shaper calibration.