1 / 2
Peoples Repeater Hole Filler and Rak Mount — zdjęcie 1
1 / 2

Peoples Repeater Hole Filler and Rak Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Glue in mount for a RAK wisblock mini and a hole filler for the old power switch.

Ocena
0 / 5
Polubienia
4
Pobrania
17
Wydruki
0
Wyświetlenia
189
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is just a hole filler for the old ON/OFF switch and a glue in mount for a RAK Wisblock mini. I had a few lying around and wanted to use them up before I buy any XIAO boards. You have to cut off the old studs and get them somewhat flat. I made the channel in the middle to take up for slack in the SMA adapter. Uses 2.5mm threaded inserts. I threw this together in Tinkercad so its pretty rough but it works. You should have enough room for a silica packet in the bottom if needed.

https://www.tinkercad.com/things/4EH3RlniUBK-rak19003-mount

https://www.tinkercad.com/things/0qpbU5mAep3-peoples-repeater-hole-filler