KLX250 Fender Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hook for attaching a small bag or inner tube to the front fender of a 2020 KLX250.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A hook for attaching a small bag or inner tube to the front fender of a 2020 KLX250.
The example here is printed in CF-Nylon. For additional strength, there is a 0.125" cross-hole that needs to have a 0.125" steel or aluminum rod pressed in.
This hook is for use with ski-straps, the one pictured here is 1.125" wide. This may also work well with a narrower strap. The straps were cut, the buckle end was attached to a hook on one side of the fender and the tail end was attached to a hook on the other side of the fender. Chicago bolts were used through the straps' holes to hold the straps onto the hooks, as shown in the image here.