Sovol SH03 Filament Drier Riser for 2020 / 3030 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Base and Riser for a Sovol SH03 4 spool filament drier to be installed on some aluminum extrusion drawers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Open Community License v1.1 + General Attribution v1
I needed a mount for a Sovol SH03 filament drier in my new printer cabinet so that I could have the drier on a drawer made of some aluminum extrusion.
This mount matches the underside of the Sovol SH03 4 filament drier perfectly, allowing the rubber feet of the unit to act like anchors on this. The riser is set up so that it can be printed at various Z-scales to allow for higher or lower clearance as needed for your application. The base and the riser are attached using some self tapping wood screws, and the riser is attached to the extrusion using standard m5 t-nut hardware.
The SH03, even fully kitted out with 4 1kg spools does not weigh a whole lot, so these do not need to be printed particularly thicker than default settings. But I do recommend PETG to deal with the heat soaking that these are likely to see.
Enjoy!