OnTwos (OnDos?) Phantom Double Stack Magazine Moose's Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some minor and major updates to the Phantom version of the ontos. Ready for multi color printing.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 773
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Magazines found here:
Sending as a step file only for now. Might upload the print file later. Odds are someone will want to modify it to take the normal m3 screws. I have and like my #4 screws so I used those everywhere. To be fair it probably could just be glued together except the TPU bits.
Hexes are meant to be split, turned into modifiers, and then color changed. Kill them before exporting the files to get rid of them.
Thanks to ChungyCheese who I will also tag when he finally uploads his version. He did the double stack modification.
As built it now requires an additional 25 #4x3/8 self threading screws, a 20mm x m3 pin for the catch, and a 1.5" 10-32 bolt for the back of the stock. Also 1 drum/continuous force spring for each magazine.
The Moose Bite BCAR in the files takes 9 M3x25mm pins and 9 F683ZZ bearings.