Gridfinity Baseplates - Parametric Autodesk Fusion Files (.f3d)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Baseplates - Parametric Autodesk Fusion Files (.f3d)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Two Autodesk Fusion files that use parametric to generate Grifinity Baseplates. One is "neat" and one includes provisions for magnets.
The a "margin" or "boarder" parameter is included. This will allow the plate size to be adjusted to accommodate areas that are not easily divisible by 42 mm. Which is a handy feature when trying to fill out an existing drawer.
The design is based on a YouTube tutorial video from the Learn It! channel. You can visit the video here:
To use, open files in Autodesk Fusion and adjust the parameters (fx) as desired.
Note if magnets, will be used, you will need to define the diameter and depth/thickness of the magnets. Default is a 6.0 mm Dia. x 2.0 mm Deep/Thick.
Recommendations for Printing:
Material: PLA (but feel free to use what you want)
Layer Height: 0.16 mm or 0.20 mm
Nozzle: 0.4 mm (mostly for definition)
Number of Walls: 3
Infill Density: 15%
Top & Bottom Thickness: ~0.6 mm or 3-4 layers
Wall Generator: Classic
Order of Walls: outer/inner
Supports: Not required
Use Inner & Outer Brims. This will help minimize or eliminate corner lift of or warping.