Snowsky Echo Belt Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Belt Clip Case for the Snowsky Echo DAP
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple clip case for the Snowsky Echo (Not the mini)
The belt buckle is a bit on the thinner since its meant to be tucked on a waistband. A thicker option is available if you want a more sturdy clip.
Tested and printed in PETG. PLA would also work, though note that you should not overbend the springy parts in case they deform. Its also notably stiffer with PLA.
While the entire model prints as a single piece, removing the supports near the release "spring" can be quite hard with PETG. Using a flathead screwdriver with a light tap from a hammer to remove that part might help.