AAA Battery Case / BOX / Capsule / Container -- 2x 3x 4x 5x 6x 10x -- IP52 -- Lite, Spiral Vase Mode, Ultra lightweight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for AAA batteries. Version for 2, 3, 4, 5, 6, 10 pieces. Holds around IP 52. Holds the batteries in place.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A container for AAA batteries and rechargeable batteries. Available in versions for 2, 3, 4, 5, 6, and 10 pieces. Super lightweight and compact. Takes up almost no space.
The locking mechanism is based on the shape of the box and the lid. Sturdy. With properly configured tolerances, it won’t open on its own.
The box has inward-facing bumps around each battery slot to prevent the batteries from moving around inside.
I estimate its dust and water resistance to be around IP52. This means it will withstand light rain while in the pocket of water-permeable clothing or a backpack. It will survive a trip to the beach.
Personally, I use these containers to store batteries after removing them from devices—so that, for example, if they leak while sitting in a closet for a year, they won’t damage the electronics. For these partially used batteries, I use color-coded containers (red), and for fresh ones—white ones (as backup batteries for camping gear).
PRINTING:
Ideal for printing with PETG, PCTG, nylon, PP, ABS/ASA, and other lightweight and durable materials. But PETG/PCTG are sufficient ;)
Dimensions are optimized for a 0.6mm nozzle.
If the lid is too tight, I recommend enlarging it by 0.2–0.35mm in the X and Y directions. Do not use percentages.
To ensure a tight seal, I recommend printing in vase mode with 4–5 layers on the bottom.