Flock Camera with chamber; squirrel and bird feeder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to look like a Flock camera, hollow with chambers and a removeable hatch for putting treats for your friends
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 3476
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
Recommended print:
- For outside use, print in a UV-stable material or paint.
- Models may come not laid down on the bed. I use Cura as a slicer. Recommend laying on the flattest portion, and angle the two larger pieces, they will fit on a 220x220 bed.
- The only piece you may want to use supports for is the face because of the logo recess.
- The door/hatch is interference fit; you will need to sand it to fit tightly depending on your printer.
- I designed this to use 8 M4 socket-cap screws to hold it together. I haven't fully explored whether the screws will fit, but my intent is to melt M4 inserts into the holes on the face, and M6 inserts into the two mounting holes.
Version 2 after making a few prints!
Face and body modified to give larger holes to actually fit the screws.
Holes sized to accept hot melt nuts for M4 and M6 bolts
Flat mount now made now in another model