Dummy 14 Version 2.0!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Version 2 comes with a completely redesigned frame, and ball joints that don't need supports! 🏗
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Launch into action with Dummy 14 Version 2.0!
Completely redesigned for Version 2.0, Dummy 14 can now be printed without supports, takes as little as 45 minutes* to print, and is designed to be quick and easy to assemble.
Once again, I’d like to thank Soozafone for the inspiration behind this model. All parts in Dummy 14 are 100% original designs.
Assembly: Use the shorter joints for the arms and the longer joints for the legs.
All models were designed using Tinkercad and Onshape.
⚠ PrusaSlicer note: Splitting the main STL into objects can sometimes be difficult due to the way Tinkercad exports models.
🛠 Designing your own accessories or remix? Check out the included Dummy 14 Design Documentation for attachment dimensions, ball-joint measurements, accessory interfaces, and remix guidance.
Print Setting | Recommended Value |
|---|---|
Supports | None for primary models |
Layer Height | 0.10mm FAST DETAIL - 0.25 SPEED |
Infill | 5% - 15% |
Brim | Not unless your printer has poor bed adhesion |
*Approximately 45 minutes on a Prusa CORE One using the 0.25 mm SPEED profile. Print time varies by printer and settings.