Twisted Sister TS Monogram Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We're not gonna take it! Print the iconic geometric Twisted Sister TS bone-and-bar monogram logo display plaque.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Come out and play! This 3D display model captures the classic geometric Twisted Sister "TS" monogram emblem. It features the iconic bone-and-bar design with an open silhouette and a clean 0.125" face inset, making it look sharp as a single-color print or with painted/filament-swapped inset details.
This model is part of my my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art of classic band logos into clean, printable display pieces.
Dimensions
Width: 8.0”
Height: 8.0”
Total Thickness: 0.5”
Face Inset Depth: 0.125”
Mounting: Built-in (2) keyhole slots on the back for small screws or finish nails to allow flush wall mounting.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm
Infill: 10% or higher (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Looking for the full band name plaque? Check out the companion listing here:
Where It All Began:
Want to check out the original 90s pen-and-ink drawing that inspired this project? Check out the anchor model here: