Gridfinity Drawer Kit — 14 Bins + 4 Wide Baseplates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Half-height and oblong Gridfinity bins plus wide baseplates — the sizes a shallow drawer actually needs.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
The sizes the usual Gridfinity starter sets leave out.
Most starter sets are deep square bins on square baseplates. Drawers are the opposite: shallow and oblong. This kit is 14 bins and 4 baseplates built for that.
Half-height bins (2u, 17.5mm tall) — 1x1, 1x2, 2x1, 2x2, 3x1, a 2x2 with four compartments and a 3x1 with three.
Standard-depth bins (3u, 24.5mm tall) — 1x3, 2x3, 3x2, 3x3, 1x4, a 2x2 with two compartments and a 4x1 with four.
Baseplates (thin — no screws or magnets needed) — 3x2, 4x2, 5x4, 6x3.
Every bin keeps the scooped front and the label tab, so you can get a part out one-handed and see what is in it from above.
Printing: no supports. Bins print fine at 0.2mm; the baseplates are happier at 0.3mm to save time. Millimetres — do not scale, or they stop being Gridfinity. The baseplates are the thin style on purpose: the screw-together style needs hardware most people fitting out a drawer do not have.
Every file in this set passed a watertight/manifold check before it was published.
Gridfinity is an open standard created by Zack Freedman. These are original parts built to that spec.
More free files and everything else we make: https://guildsandgrains.com/links?s=pr
More designs from Guilds & Grains — my full catalogue of miniatures, organisers, cutters and labels is at https://cults3d.com/en/users/matthewmichels/3d-models
If you print this, I'd genuinely like to see it. Post a Make with a photo — it helps other people find the model and tells me what to design next.