Oscilliscope probe organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tidy up your electronics bench, and keep your oscilloscope probes handy with this oscilloscope probe organizer.
- Ocena
- 4 / 5
- Polubienia
- 94
- Pobrania
- 532
- Wydruki
- 1
- Wyświetlenia
- 4304
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Tidy up your electronics bench, and keep your oscilloscope probes handy with this oscilloscope probe organizer. Designed to sit under a modern digital scope, this organizer features drawers for 4 probes. Slots in the door fronts allow the probes to be stored while still connected to the scope, and each drawer features small component boxes for holding your probe accessories.
To assemble this, you will need:
- 1pc ‘shelf_right’
- 1pc ‘shelf_left’
- 2pc ‘drawer_outer’
- 2pc ‘drawer_inner’
- 4pc M3 nut
- 4pc M3 flathead screw, 8mm length
After printing, the two shelf halves can be screwed together to make a single, larger shelf.
Note that due to a small modeling mistake, the two middle drawers are 2mm thinner, and thus aren't interchangeable with the outer drawers. Oops!