Adjustable electrical box for external wall insulation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable electrical box for exterior EPS insulation, designed for 60 mm socket mounting.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Electrical box for mounting under insulation on the outer wall. Socket mounting screw spacing is 60mm which is European standard. Adjustable range is 15.5 - 22cm. Model was created in tinkercad, therefore thread is a bit low poly and depending on material it may be a little hard to screw toghether two parts due to friction but its totally usable. The double box version is made to fit two sockets/switches with each other. Top parts are meant to be printed without any supports. The bottom part needs them so i upload photo where to put them. DO NOT PUT SUPPORTS ON THREADS.