EuroSkates: Low Profile Wheels for EuroBox NextGen 2.0 (600*400*X Box using 608 Bering)

What it is:

These are wheels for the Eurobox NextGen 2.0. They are designed to be as low profile as possible and to make turn boxes into drawers.

Please Note:

I only have 60x40 Boxes atm. so I can't say if it also fits for other boxes. I also just have the boxes I have and there it is a slight interference fit. Also it is designed to fit the long side of the box. On the short side the dimensions are different. If you need it for the other orientation, let me know i might design it ;)

What you will need: 

• Eurobox NextGen 2.0 (Cycle) 60*40*X

• A 608 (Skateboard-) Bearing per wheel

• Optional: 8x15mm Rod

Printing:

Orient the parts as shown in the picture, prints without support. The pin is printed horizontal on purpose to withstand the forces of a fully loaded box. Alternatively you could just take a piece of 8mm diameter (threaded) rod and saw off a 15mm piece. How solid you print it depends on how much you will load it. I would use at least 3 perimeters and 40% infill. 

Assambly:

• Put the 608 bearing into the mount

• Add the pin with the flat side facing the print bridge of the hole (like in the image)

• Push the assembly into the outer brim of the Box  

• If the fit is to loose you can add some tape to the outside of the assembly to make tolerantes tighter

• If you feel like it you can also glue it in. The box is made of PP your glue most likely will not stick permanently anyway ;)

Legal Disclaimer & Trademark Notice:

This is an independent, non-official 3D printable accessory designed solely for personal use and compatibility with Eurobox NextGen 2.0 containers.

• No Affiliation: This project and its designer are not affiliated, associated, authorized, endorsed by, or in any way officially connected with the manufacturer or brand owners of Eurobox NextGen 2.0.

• Trademarks: All product names, trademarks, and registered trademarks (including "Eurobox" / "Eurobox NextGen") are the property of their respective owners. Their use here is strictly for identification and compatibility reference only ("nominative fair use") and does not imply any connection or endorsement.

• Use at Your Own Risk: This 3D print file is provided "as is." The designer assumes no responsibility or liability for any damage, loss, or injury resulting from the printing or use of this model.