Sawholder (blade holder) fully 3d printed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
friction roller retension to hold saws and other flat things.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits and holds up to 5 saws — intended for Japanese saws, but it can hold most thin, flat things up to around 3mm. I was surprised how well it can retain things.
Practical with 5 in one. Use countersunk screws and make sure the head is small enough to not interact with the rollers. Around 3mm OD wood screws work fine :)
This is designed to use only 3D printed parts, and the "angle" of the roller is adjusted to increase friction.
inspired by other similar designs, this is re-drawn from scratch to function well with only 3d printed parts.