1/3 Scale Carter siren
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is untested, but the prototype is tested and works
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
This is a model of a European Carter siren.
The base - to motor uses M4 bolts, with the inserts in the base
The motor housing uses M3 bolts, with inserts, and the motor end bells hold the motor in place.
The motor used is a Samsung 29 motor.
The stators are held on with M3 threaded inserts in the end bells.
The bolt holes at the bottom of the base are M5
The junction box cap is M3, with inserts in the thing sticking out idk
The rotors use an 8MM to 8MM shaft coupler
M4 bolts: https://www.amazon.com/dp/B0GQBWSCYN?ref=ppx_yo2ov_dt_b_fed_asin_title
M3 Bolts: https://www.amazon.com/gp/product/B0DFWYBJJJ/ref=ewc_pr_img_1?smid=A3VWSM04WXOXUZ&psc=1
M4 threaded inserts: https://www.amazon.com/ruthex-M4-Threaded-Inserts-RX-M4x8-1/dp/B07YSV66Y5/ref=sr_1_1_sspa?crid=HCF0VU2O1R24&dib=eyJ2IjoiMSJ9.jSy3rZYZ50zaAgl1aKhIkK9Q34a4MUbO67O-HhUztqWZ9ug4_h338yKmxKyrwj5ytNFYDMfg-Ty_AWuz2tR7_ni4ZqiORWgUHPYuPvR1xSokymDTxx8uSAhQN1Mkipw9HMQDwLsNYpDghU1I-BY6OZkgqf2NHcPBcV_Q1KV_ukc52IOen2rU-U6QrVvFV3YkKufnq8IpVK-GKFKVIfCKrmYMgPek0mp9ujrNX4x8oTerPKUqdkoQCB0XjZD0OyAB87ezLt30_aD1iUDbTVqazI7xRqYdcdE0Cgef_ZMqrY0.h8AUGB6zxbuWoSBVqDNxu1AWIgX50f8LYYi1jzNLrAI&dib_tag=se&keywords=M4%2Bthreaded%2Binsert&qid=1786369030&s=industrial&sprefix=m4%2Bthreaded%2Binsert%2Cindustrial%2C160&sr=1-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1
M3 threaded inserts: https://www.amazon.com/dp/B08BCRZZS3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
8MM to 8MM shaft coupler: https://www.amazon.com/gp/product/B07QQM831T/ref=ox_sc_act_image_1?smid=A2SMJ54KUUKFOZ&th=1