PTFE 4-Way Tube Clip – Stays in Place
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secure 4-way PTFE tube clip that stays in place. Slight misalignment + one tighter hole for better grip without pinching
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple but effective PTFE 4-Way Tube Clip – Stays in Place!
I couldn’t find a 4-tube clip that stayed put — everything I tried eventually slid out of place. So I designed this one.
Key features:
• Split design with a slight intentional misalignment that helps grip the tubes
• One hole is slightly smaller so the clip locks in place once installed
• Does not pinch or restrict the filament path inside the PTFE tubes
• Material optimized — unnecessary bulk removed while keeping it strong
Printed in PETG (AAA PETG Rapid shown). "SunLu Matte Orange" works great on the Elegoo Centauri Carbon with Canvas, but should work on any printer that needs to organize four PTFE tubes.
Print settings used:
- 0.4 mm nozzle
- 0.2 mm layer height
- No supports needed
