3D Printed Replacement Sunglasses Frame (Wayfarer Style)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed Replacement Sunglasses Frame (Wayfarer Style)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D Printed Replacement Sunglasses Frame (Wayfarer Style)
Accidentally broke the frame of your favorite sunglasses, but the lenses are still in perfect condition? Don't rush to throw them away! This 3D-printed replacement frame is specifically designed to rescue your lenses and get you back in the sun.

This model features a classic, slightly rounded design reminiscent of the iconic Wayfarer style (or soft square/rectangular). It boasts a sturdy construction and a stylish look (looks great in translucent or vibrant colors, like the blue in the photo!). It's the perfect eco-friendly and cost-effective DIY solution for summer eyewear repair. Just pop your rescued lenses into the new frame, screw the hinges together, and you're good to go.
Required Hardware
Important: This specific frame design features a reinforced hinge that requires a longer screw than standard optical glasses.
Screws: You will need 2x Self-Tapping Screws, approximately BT2,5 - 16mm in length (one for each arm).
The design allows the thread to bite directly and securely into the printed plastic. This provides a strong, durable, and reliable folding mechanism without messing around with tiny threaded inserts or nuts.
Printing Recommendations
Material: PETG, ABS, or ASA are highly recommended. These materials offer the necessary durability, flexibility for lens insertion, and crucial heat resistance (so the glasses don't warp if left in a hot car). PLA can be used, but it might be too brittle and prone to warping in direct sunlight or hot environments.
Infill: 30-50% (higher density recommended around the hinge joints for maximum structural strength).
Supports: Minimal supports may be required under the hinge overhangs, depending on your printer's bridging capabilities.
Brim: Recommended if you have bed adhesion issues.
