Iron Maiden Name Logo (Stacked Version)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bring the legendary NWOBHM power to your walls with this stacked lettering Iron Maiden display plaque.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Up the Irons! This 3D display plaque features the iconic, jagged typography of Iron Maiden in a compact, stacked layout ("IRON" positioned over "MAIDEN"). Designed with a distinct white perimeter outline sitting over a solid black backing base, this piece creates an authentic multi-layered pop straight off the wall.
This model is another entry in my Slave To The Metal 90s Drawing Series /Collection, where I am systematically turning my original hand-drawn concept art into clean, printable display pieces.
Dimensions
Text Width: 8.68”
Text Height: 2.0” Main Lettering / 5.043” Overall (with tails)
Text Thickness: 0.25”
Text Inset: 0.1”
Base Width: 9.084”
Base Height: 5.4”
Base Thickness: 0.1875”
Total Thickness: 0.4375”
Mounting: Features (2) built-in key-hole slots on the back of both the Base and No-Base variants for clean hanging with #3 screws or nails.
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm (Lower layer heights will make the sharp angular slopes of the letters look incredibly smooth).
Infill: 10% or higher. (Gyroid or Grid patterns work great).
Supports: None required when printed flat on the bed.
Looking for the single-line horizontal layout?
Check out the companion listing here:
Where It All Began:
Want to see the original 90s pen-and-ink drawing that inspired this ongoing project? Check out the anchor model that started the series: