1 / 7
6mm Silicone hose Pinch valve hose clamp remix — zdjęcie 1
1 / 7

6mm Silicone hose Pinch valve hose clamp remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Silicone hose Pinch valve hose clamp remix , bigger teeth , wider pinch release

Ocena
0 / 5
Polubienia
52
Pobrania
107
Wydruki
0
Wyświetlenia
461
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and tells me the design was worth sharing.

I loved Ian Foulds replacement Platypus hose clamp but scaling down to the 6mm hose i found the teeth no longer gripped the clamp , took 20mins to redesign the teeth and clamping section to allow the flow to fully open up when released and just added 3 larger teeth , did some testing and this will work for my requirements , i just wanted some valves to stop leaks on my 6mm OD silicone hoses when i disconnect water lines on my 3d printer water cooled heatsinks a simple solution that works, they just sit on the silicone hoses till i need to disconnect the water cooling heatsinks then i can pinch off the silicone hoses stopping water leaking and disconnect the 3d printer for the odd occasion i have to pull it out of the enclosure to do some build changes.

Versions :
V3 Two versions 100 and 60 which represent the scale ie 100% original size , 60% scaled down, printed and tested 60% scale for crimping a 6mm OD silicone hose.

Printing :

paint on organic supports , 25% infill , 2-3 parameters 

Tagi