Garmin inReach Messenger Shoulder Strap Shock Cord Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shock cord guide for Garmin inReach messenger (and mini)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this shock cord guide to attach a Garmin inReach Messenger to a shoulder strap as simply as possible. It allows the inReach Messenger to be secured in Garmin’s recommended orientation, with the top of the device oriented toward the sky.
There are three versions, each offering a different balance of ease of use and appearance:
Pillars – the easiest version to attach and remove.
Lines – a good balance between simplicity and ease of use.
Arcs – the most design-focused version.
All three versions require 1/8-inch (3 mm) shock cord, formed into a loop approximately 18 inches (46 cm) in circumference.
The installation method is the same for all three versions. First, loop the shock cord once around the back of the Garmin in-Reach Messenger. Then use the shock cord guide to redirect the cord sideways. Wrap the cord around both the in-Reach Messenger and the shoulder strap, and finally secure the shock cord to the guide.
For the Lines and Arcs versions, the slit width is carefully designed so that pulling on the shock cord allows easy attachment, while releasing the tension secures it firmly in place.
Although this shock cord guide was designed for the Garmin inReach Messenger, it will probably also work with the inReach Mini.