Ender 3 Neo Titan Extruder Direct Drive Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Direct Drive Pancake Type motor (Max 29mm body) supported Titan Extruder Bracket For Ender 3 Neo Series.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Disclaimer: We are not responsible for any problems you may cause with your property and Printer. The Responsibility is Yours!
Maximum supported bodylenght is 29 millimeters DO NOT TRY WITH STOCK MOTOR. I use Nema16 motor is MOONS 16HY4401-02N with some spacers (32mm body) and even though it rubs slightly against the aluminium frame, it’s in place and working. Also support Nema17 motors. I use clone titan extruder but its also work very well. This model may be positioned slightly too high for standard Ender 3 Neo printers because I am using Volcano block and upgrade brackets. If you want look you can look my profile.
As with all Hotend parts, I do not recommend PLA.
You can use ASA, ABS, PA, PETG.
I must say that I used these models and they made my job very easy:
https://www.thingiverse.com/thing:5813643
https://www.thingiverse.com/thing:6419529
https://grabcad.com/library/e3d-titan-extruder-2
https://www.printables.com/model/162359
Thanks.
Compitable cable chains Link:
https://www.thingiverse.com/thing:4932649
It's really exhausting to still be developing an Ender 3 in 2026—this printer is the biggest mistake of my life.