Semi-DIY Magsafe Smartphone Cinema Cage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print the cage, then hack together a mount for your phone. Requires 1/4-20 Heat Set Inserts and M3 Screws.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Inspired by @3DKimba's CMF RIG PRO, but made generic. This is NOT a remix.
Features a large amount of 1/4-20 heat set insert points, a lot of M3 mounting holes, and a cutout for the phone port for cables. While I would've preferred to not use heat set inserts at all, given that this cage could be mounting expensive camera equipment like mics and lights, I think spending the money to get proper heat set inserts is worth it here. I used 12.7mm long heat set inserts which were nice because they were easy to insert, but the 8mm ones should work as well.
I used these parts:
Drawing of the hole locations is included for ease of DIY design.
Usage:
Print the Camera Cage file and add 1/4-20 heat set inserts where necessary.
Take the Overkill Plate and cut out whatever your phone needs, however you want to mount your phone.
Add a clamp that screws down on the sides or glue a phone case to the mount plate, it doesn't matter.
Use M3 Screws to connect the Smartphone Plate to the Camera Cage.
Design anything else you see fit, and attach it to the Camera Cage.