Trinket Display Box with Magnetic Door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cute box to display your trinkets! Uses a sheet of clear plastic and four 5x2mm magnets. Fits on a Prusa Mini+ bed.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Supplies:
At least 250g of PLA or PETG filament
Four 5x2 neodymium magnets
One sheet of acetate or other clear plastic (plexiglass works great)
Plastic-compatible glue
Instructions:
Print the door front-side down and the box flat on its back. Supports may help the hinge nubs from sagging during the first few layers,. but they are not needed. If this happens, all you need to do is clip or shave off the extra plastic so it will fit into the hinge holes.
Once everything is printed, put the magnets in. The four 5x2mm magnets are press-fit with .2mm of tolerance. This measurement works for me, but if your printer does better with a different tolerance, you can try to scale the print up/down a bit or just use superglue to keep the magnets in place.
Next, attach the door to the box by putting one side of the hinge in the hole, then bending/stretching the door EVER so slightly to seat the other side of the hinge. If the hinge doesn't fit or rotate easily, you may have to sand down some extra plastic off the hinge nubs that drooped during printing.
Now that the door is on, you can make the window. Use the included printable template or just trace the door onto a piece of acetate or other clear plastic. Cut out the shape, then affix the acetate to the inside lip of the door with the glue of your choosing. I ended up using hot glue, but the heat will warp the plastic, so you have to be careful. Super glue can leave a white residue on acetate, so I didn't try that. B7000 may be a good option, but mine dried up so I couldn't test it. If you have good luck with another type of glue, please let me know in the comments!