1 / 2
6mm dawel drill jig for SLS 38mm wooden lumber — zdjęcie 1
1 / 2

6mm dawel drill jig for SLS 38mm wooden lumber

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drill guide to make 6mm dawl connection in te midel of a 39mm SLS beam for corner or straight peas

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This jig is made to drill 6mm or 3mm holes 19mm from the inner edge. this makes it ideal for 38mm high SLS beams. Even if the beams are slightly smaller as long as you reference the same planes that need to line-up  the dawels will match.

It comes with 2 camfered edges for each hole that can be used as a center mark locater. The outer edge of the jig can be used to mark drill locations in a 90° corner.

printed in PLA | 0.2mm layer height | 15% infill | Prusa mk3S

Tagi