1 / 5
Lazy Sue for Airbrush Work (re-using part of a Prusament spool) — zdjęcie 1
1 / 5

Lazy Sue for Airbrush Work (re-using part of a Prusament spool)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lazy Sue is my first attempt at a "turntable" to aid my airbrushing work.

Ocena
5 / 5
Polubienia
97
Pobrania
231
Wydruki
1
Wyświetlenia
2697
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lazy Sue is my first attempt at a "turntable" to aid my airbrushing work. It's still pretty much work in progress but it's usable - just stick your model onto the “plate”, fire up your airbrush and use one of your hands to slowly rotate the plate while spraying your base colour onto the printed object :) 

To assemble this, you will need a few extras:

  • 1x 608Z bearing
  • 1x approx. 23 mm long rod 8 mm diameter
  • 1x plastic disc from a Prusament spool 

If you're asking about that baby Yoda (Grogu) Easter egg holder in the photos, this one is by HEX3D (https://hex3dpatreon.com). 

Tagi