1 / 5
Samsung EP-P3100 (3105) - Z Fold 8 Stand — zdjęcie 1
1 / 5

Samsung EP-P3100 (3105) - Z Fold 8 Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small angled stand for the Samsung EP-P3100 or 3105 charger and the Samsung Galaxy Z Fold 8 (the wide one)

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This is a stand for charging the Samsung Galaxy Z Fold 8 with the Samsung EP-P3100/3105 circle shaped wireless charger in an upright position.  It is based on the work of Wilber and his stand.  I just cut it down to work with the shorter Z fold 8 (the wide base model, not the Ultra version).

There is not a lot of room in the back for a cable to come up from the bottom, but you can bring it in from the side if needed.

The fit is not very tight on the charger.  Might need a piece of double sided tape to hold the charger in place.  It works without it, but a little loose.

I printed this in PLA with the default PrusaSlicer Core One settings.  No supports should be needed.

Note: This product is not associated with or endorsed by any brand mentioned in the description

Thanks to Wilber for the original stand I borrowed from to make this shorter version.

Tagi