1 / 3
Gridfinity Insert STIER Tool Containers Systainer — zdjęcie 1
1 / 3

Gridfinity Insert STIER Tool Containers Systainer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Adapt the Gridfinity System to your toolbox

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
70
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Public Domain

Turn your STIER tool container into a Gridfinity-compatible storage system with this simple two-piece insert.

The set consists of a Gridfinity base that fits directly into the bottom of the container. Gluing it in place is optional, allowing for a permanent installation or a removable setup.

An optional lid insert completes the system. It snaps together with a tongue-and-groove connection and creates a smooth, flat surface on the inside of the lid. The lid piece can be fastened directly to the container lid using five 4.5 × 16 mm countersunk wood screws.

Add a 10 mm thick foam pad to the lid and your Gridfinity setup can even be stored upside down without the contents shifting around — useful for transporting your organized parts and tools without everything falling out of place.

Features

  • Gridfinity-compatible STIER container insert

  • Base fits into the bottom of the container

  • Optional lid insert for a smooth interior lid surface

  • Lid fastens with 5× 4.5 × 16 mm countersunk wood screws

  • Designed for use with 10 mm foam on the lid

  • Foam-backed lid keeps Gridfinity bins and their contents securely in place even when the container is turned upside down

  • Suitable for the STIER containers

  • Gridfinity container height recommendation for 180 mm tall box: 1x 116 mm or 2x 60 mm (from base to top)

 

 

Material:

 

  • Stier Systainer³ 180 mm: 

  • printed base

Optional:

  • Foam pad 10 mm thick (official  one may also work, I cut an IKEA foam pad in three with a hot wire cutter)

  • printed lid insert

  • 5× 4.5 × 16 mm countersunk wood screws

Tagi