1 / 5
Tubeless Anchor - Retainer Discs for Repair Plugs — zdjęcie 1
1 / 5

Tubeless Anchor - Retainer Discs for Repair Plugs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small disc designed to prevent tubeless tire plugs from being pushed back out of the tire

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A small disc designed to prevent tubeless tire plugs from being pushed back out of the tire, particularly on high-pressure tires such as road bike tires.

The disc is installed from the inside of the tire, sitting against the inner surface and locking the plug in place. Multiple disc sizes are included because tubeless plugs can vary considerably in actual diameter and may otherwise not grip the puncture firmly enough.

Instructions for use

  1. Locate the puncture in the tire.

  2. Enlarge the hole if necessary. The model is designed for plugs with 1.5 mm or 3.5 mm diameter.

  3. Select a suitable disc size and slide it over the tubeless plug.

  4. Unseat part of the tire and insert the plug from the inside, passing it through the puncture and the retainer disc.

  5. Reseat the tire, add sealant if necessary, and inflate to the desired pressure.

  6. Be glad you printed these before you needed them.

Note: The tire needs to be partially unseated to install the retainer from the inside.

Tagi