Insert for magnetic couplings to prevent lateral motion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small insert for the magnetic coupler so that you can have 1 male fitting and all other fittings are female.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Make sure that you print with a brim of at least 2-3 mm to avoid a bird's nest of filament in your print.
This may not scale correctly into your printer, so just ensure the dimensions (on the XY axes) are 101mm x 101mm, and you'll get a perfect fit. This print has a very tiny slope so there is a small end and large end. The large end will be the bottom layer on your print bed.
Push the insert through the back of one magnetic coupling, small end first, and you should find it fits nice and snug once there is about 3.3mm standing proud of the coupling side. Layer lines make the insert lock in tightly.
Now, your couplings will never slide apart!