Polyhedra Connectors (d4, d8, d10, d12, d20)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connectors for creating complex polyhedra using round edges (wooden dowels or similar). Includes all RPG dice shapes.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These models are for making the connectors (vertices) for large polyhedra. Edges are typically made from wooden dowels, cut to the width of the connector (1/2" or 3/8"). For the platonic solids (d4, d8, d12, d20), you just need to cut all dowels to the same length and print the correct number of connectors:
d4: 4 vertices, 6 edges
d8: 6 vertices, 12 edges
d20: 12 vertices, 30 edges
d12: 20 vertices, 30 edges
For the d10 shape, there are two edge lengths (10 of each) and two kinds of connectors (two polar connectors, d10P, and 10 equatorial connectors, d10E). The ratio from long to short edge is 1 : sqrt(2 + golden_ratio), rounded to a close simple measurement (for example, we did for a 12in long edge a 6 1/8" short edge).
d10P: 2 vertices, 10 edges
d10E: 10 vertices, 10 edges
We'd recommend trying this out with edges from 6 to 24" long, depending on how large you want your shape to be (go smaller on d20 and d10, they're already quite big).
d10E/d12 connectors need supports to print (if you do it without supports successfully, let me know how you pulled it off).
These are designed for press-fit, which can be finnicky — if you're installing permanently, just feel free to glue in the rods!
Update 10/02/2026: Updated the model to have better tolerances, wall thickness, and length of the tubes.