SHT45 Mount for RJ45 Screw Terminal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for an SHT45 temp/humidity sensor to an RJ45 Screw Terminal Panel Mount
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to add a temp/humidity sensor to the Homeracker Dry Box that I could connect to an ESP32 and link it to Home Assistant... for... reasons... I researched a few options for connectors and bastardizing an RJ45 jack seemed like the best option, easy to mount, cheap cables, etc.
These connectors seemed like the best option:
https://www.amazon.com/dp/B0FLXCSJ2N?ref=ppx_yo2ov_dt_b_fed_asin_title
The mount slides on to the end of the jack, and the SHT45 (in the below layout) mounts with a couple M2.5x6mm screws with nuts on the back.
https://www.amazon.com/dp/B0H69PZ7RJ?ref=ppx_yo2ov_dt_b_fed_asin_title
4-pin Stemma QT wires for the connection (because I suck at soldering) and got a nice, compact device.