1 / 3
Homeracker CYD Mount — zdjęcie 1
1 / 3

Homeracker CYD Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Way to mount a CYD into a Homeracker setup, also includes for TCA9548A multiplexers

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

So this is obviously based off the Homeracker system:

I wanted a way to mount a CYD in my Homeracker system as part of a project. I also needed someplace to put at least a couple TCA9548A multiplexers, so I included the mounting points for those using self-tapped M3 bolts on the back side.

The screen I used is not perfectly symmetrical left to right, so it does have to be installed a specific way. The USB-C port should be on the right side when looking at it from the front.

A right-angle USB-C plug would be ideal for this, because right now in V2 one of the standoffs for the multiplexer is in line with the USB port on the CYD. I'll probably post an updated version later once I move the standoffs around a little bit. For now, I just cut off the offending standoff since I'm only using one multiplexer.

This is the CYD I used:
https://www.amazon.com/dp/B0FKG7WRWV

TCA9548A multiplexers:
https://www.amazon.com/dp/B0FDFQ94HB