Kids Room Sign
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kids room door sign. My son asked for one and hand picked the icons :-)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I had a prototype printed with PETG but then settled on PLA, both would probably work.
For me, 3 perimeters and 0.2 mm constant layer was fine, plus manual color change
for the icons, obviously. No supports needed.
After printing, rotate the lid and use the gap on the back to get each notch to catch.
The design is somewhat tight, after working it for a bit the wheel should rotate
easily enough but stay in position afterwards.
The original sources are available at https://github.com/ceresek/prints/tree/main/things/toys/door-sign.