80mm fan mount printrbot 1405
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount will allow you to put an 80mm fan on the front of your print head to blow air on the front of the extruder…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This mount will allow you to put an 80mm fan on the front of your print head to blow air on the front of the extruder and print area.
Could possibly be combined with a fan shroud to direct the air flow a bit more.
Also could be tweaked to have the fan point at the extruder.
I included the 123d file so that it can be easily modified.
Instructions
Can be printed without supports.
The mounting holes for the side of the printer might need to be drilled out.
I was able to use the existing screws on the side of the print head for mounting.
My fan needed a 20mm m3 screw, however a shorter screw would work for other fans.
Category: 3D Printer Accessories