1 / 3
GNSS RTK Desk Stand Honeycomb 5-8" 11 TPI Threaded — zdjęcie 1
1 / 3

GNSS RTK Desk Stand Honeycomb 5-8" 11 TPI Threaded

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Very low quality design (not symmetric, uneven borders, not centered column) for holding GPS, GNSS, RTK receivers

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
61
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

This model is not centered or symmetric. The outer border edge of the honeycomb design is not consistent, and the cylinder is not centered in the triangle. And the triangle shape is not an even triangle. 

 

I print this in PLA pro high % infill for the threads and because GPS are heavy. 

 

The design works well enough to hold GPS up on my desk - so it's perfect.

taking another 5/8" 11 TPI thread and honeycomb design (maybe from tinkercad) I made this stand. I also had claude smooth the cylinder adding many more faces when I didnt like the first one.

Tagi