Mockingbird 2.0 - Leedle Pike-optimized
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mockingbird 2.0 "Smiley-only" model, but with tweaked dart-lip geometry
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mockingbird 2.0 didn't seem to fit correctly in my Pike. Some debugging found interference with the front of the dart-holding lips. Verified that my Nightengale magazine had different angled lips that fit better.
This remix tweaks just the lips in a way that fit my pike better. Hopefully it helps others.
Uses springs, followers, and endcaps from the original model.
If you were wondering: These mags BARELY feed 38mm sabre T-Darts!! compared to "not at all" for the stock nightingale. I think I'd recommend a heavier spring than the 0.2lb, to push through the friction that the longer darts have on the front/back of the magazine.
Overall, my whole goal was to feed 38mm darts through my pike, and I think with a little finagling a handful of these will make it smooth.