1 / 20
Print-in-Place Planetary Gear Fidget Spinner (No Supports) — zdjęcie 1
1 / 20

Print-in-Place Planetary Gear Fidget Spinner (No Supports)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you enjoyed printing this model, please leave a Like, drop a 5-star rating, and share a picture of your build in the

Ocena
5 / 5
Polubienia
4
Pobrania
15
Wydruki
1
Wyświetlenia
130
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Ultra-Satisfying Planetary Gear Fidget Spinner (Print-in-Place Friendly)

Upgrade your fidget game with this mechanical planetary gear spinner! Designed from the ground up for maximum tactile feedback, smooth rotation, and durability. Unlike standard flat spinners, this design uses fully functional planetary gears that roll around the central sun gear, providing a unique mechanical resistance and sound that is addictively satisfying.

Whether you need something to help you focus at your desk or just love intricate mechanical models, this print is a must-have for your collection.

Key Features:

  • 100% Support-Free: Optimized 3D geometry means you don't need any support material.

  • Compact & Ergonomic: Fits comfortably in hands of all sizes with rounded outer grips.

  • Customizable Look: Great for multi-color printing or using up leftover filament scraps for the gears.

Print Settings & Recommendations:

  • Material: PLA, PETG, or Tough PLA (PLA works best for smooth gear meshing)

  • Layer Height: 0.16mm or 0.20mm (lower layer height makes gears run smoother)

  • Wall Loops / Perimeters: 3 for extra gear tooth durability

  • Infill: 15% - 20% (Gyroid or Grid)

  • Supports: NONE

Assembly & Post-Processing Guide: For the smoothest, "butter-like" rotation right out of the box, a tiny bit of post-processing goes a long way.

1. Small Planetary Gears: Use a 6mm drill bit (spun gently by hand or on very low speed) to clean out the center holes of all small gears to remove any elephant's foot or tight tolerances.

2. Main Casing / Outer Frame: Use sandpaper to smooth out the frame contact surfaces and inner edges for flawless movement and a comfortable grip.Pro Tip: Add a single drop of PTFE lubricant or mechanical oil to the gear axles after assembly for maximum spin time and near-silent operation!

If you enjoyed printing this model, please leave a Like, drop a 5-star rating, and share a picture of your build in the Makes section!

Tagi