Mini Talon Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix to change inner mount pt to 33mm spacing for HK 28-35 Propdrive v2. Outer mount pt is still at 44mm. Cut-outs…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix to change inner mount pt to 33mm spacing for HK 28-35 Propdrive v2. Outer mount pt is still at 44mm.
Cut-outs are for M3 hex nuts. (5.5mm side to side) Std M3 nuts will fit flush but nylock nuts will be a little proud of the surface.
Use M3x12 button head screws (not the ones shown in the picture as cap head screws will hit the bell of the motor). The HK motor mount is 2mm thick, 12mm screws with nylock nuts will give a few threads sticking out. If your mount is thicker then you might need longer screws.
Put some tape over the back side of the nuts to keep the glue out of the nut threads.
If you want other bolt pattern size let me know.
Print Settings
Printer:
Eclips3D
Rafts:
No
Supports:
Yes
Resolution:
.20
Infill:
40%
Notes:
3 Perimeters and 3 top/bottom layers. Printed in PETG
Category: R/C Vehicles