Topdon TS004 storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box using factory foam for a Topdon TS004 thermal monocular with magnetic lid.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Protective box for Topdon TS004 thermal monocular. Use the foam from the original factory packaging to put in the bottom. Magnet holes fit 1.8 x 7.8mm magnet from harbor freight, used super glue to hold in place.
I printed with 15% infill and it can be printed without supports.
Needed something that was a little more slim than the factory box to be able to fit in a MOLLE pouch I had. The print in the picture had magnet holes that were too small and the lip on the top was too shallow but still got the job done. The file I posted now has a deeper lip on the lid and larger magnet holes. corners and edges are slightly rounded to help reduce getting caught on fabrics.