Dry Fire Pro Muzzle Mount — Aim Training Marker (9mm / .45 ACP / .380)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slide-on muzzle marker for the Dry Fire Pro iOS app’s Aim mode. The camera tracks the white ring + red centre to measu
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A 3D-printed tracking marker for Dry Fire Pro, the iOS dry-fire training app.
Aim mode uses your iPhone's front camera to watch your muzzle while you press the trigger — it measures how far the muzzle moves, reads the drift direction, and names the fault (jerking, anticipating, heeling…) with a drill that fixes it.
The app works with a paper sticker, but this printed mount is better:
A perfect circle, every time — a printed ring can't crease, peel, or smudge. The camera gets the same clean shape every session.
No measuring — every caliber variant shares the same 18 mm tracking ring, so in-app calibration is one tap instead of a ruler.
High-contrast by design — print the ring in white and the centre in red and the tracker gets a crisp target in any light.
On and off in a second — the plug slides into the barrel by friction and pulls right back out. No adhesive, no residue, nothing touching the crown.
WHAT'S IN THE FILES
9mm_body.stl— mount body for 9 mm, suitable for 380 ACP as well — print in WHITE45acp_body.stl— mount body for .45 ACP — print in WHITEred_pin.stl— centre pin, universal size for all calibers — print in RED
Print the one body that matches your caliber plus the red pin. The pin press-fits into the body — no glue needed.
Don't see your caliber? Leave a comment — variants are added on demand. An improved version of the mount is already in the works.
PRINTING
Two colors, two easy prints: body in white, centre pin in red — that contrast is what the camera tracks, so don't substitute colors. PETG is recommended; PLA works too but is more fragile. Matte filament beats silk/glossy — glare is the tracker's enemy. Details in the print instructions below.
⚠ SAFETY
This is a dry-fire training accessory. Only ever use it on a verified-unloaded firearm in a safe direction, with no ammunition in the room. Remove the mount and inspect the bore before any live fire. You are responsible for following the four rules of firearm safety at all times.
Get the app: https://apps.apple.com/app/dry-fire-pro-gun-shot-timer/id6751209426 (App Store — "Dry Fire Pro")