Schwinn IC4 / Bowflex C6 seat post insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement of the long plastic insert that goes into the base tube of a Schwinn ic4 bike with tighter tolerances.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
A replacement of the long plastic insert that goes into the base tube of a Schwinn ic4 / Bowflex c6 spin bike with tighter tolerances than the original to keep the seat from wobbling.
The seat on mine wobbles left and right when the seat is extended. I don't know how well this will fit on other bikes but it's modelled off my own Schwinn ic4 and it's working for me. It may require some trimming of the side catch that pops into the hole in the tube to lock it in place. I also lubricated the inside a bit with some graphite powder since it's a bit more difficult to slide than with the original part.
printed PLA 0.20mm nozzle with 20% infill and supports for the holes/catch on the side.