Toolholder Remix for CC1 Canvas Relocation & Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolholder for the popular AL ExtremeError Elegoo Centauri Canvas Relocation & Riser W/ LED. Direct replacement part.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Description:
Toolholder / tool caddy for the popular AL ExtremeError (aka @AEE) Elegoo Centauri Canvas Relocation & Riser W/ LED. Front or left mounted. For the Centauri Carbon 1 with Canvas upgrade. Versions for the 45deg LED and 45deg non-LED risers. Replaces the regular front (Slim) panel or left (thick) panel, and adds a toolholder.
Features:
The tools are specifically placed to ensure they don't interfere with the front door, riser itself, or sides of the printer. There should be plenty of clearance if you stack risers, as seen in some of my pictures. However, I can't guarantee that your riser will work with this tool caddy.
On the LED versions, I also trimmed the overhang for the LED strip to be flat bottomed. This will increase surface area for support/model interface. This does not impact functionality, and is simply to aid in printability.
Tools Supported:
This caddy holds all of the CC1 tools and accessories plus a few others. It has slots for:
Glue stick
USB flash drive
Flush cutters (not included with printer)
Elegoo bed scraper (Included with CC, can also be downloaded here)
Flathead and phillips screwdriver
All 4 hex keys
Nozzle cleaning needle
Grease
Two additional compartments for misc tools (I put a rod greasing tool, and leadscrew cleaning tool)
Print List:
This is intended to be a 1:1 replacement of an @AEE original file, for either the 45° Riser (No LED) or 45° Riser (with LED). Print one of following models, based on which riser version you have and the location of the tool holder:
Toolholder Remix Description | Toolholder Remix part name |
| @AEE Original Part Name |
|---|---|---|---|
Front Tools, No LED | Front Tool Caddy_slim_straight_45_degree_no_led_P01.stl | Replaces | aee_slim_straight_45_degree_no_led.stl |
Left Side Tools, No LED | Left Tool Caddy_thick_straight_45_degree_no_led_P01.stl | Replaces | aee_thick_straight_45_degree_no_led_left_side.stl |
Front Tools, with LED | Front Tool Caddy_slim_straight_45_degree_LED_P01.1.stl | Replaces | aee_slim_straight_45_degree.stl |
Left Side Tools, with LED | Left Tool Caddy_thick_straight_45_degree_LED_P01.1.stl | Replaces | aee_thick_straight_45_degree_left_side.stl |
All other parts can be printed based on the @AEE model description.
Modeled to fit with current @AEE designer files as of 8/11/26.
Print Settings
PETG for temp resistance. 0.2mm layer height. 2 wall loops. 15% rectilinear infill. Supports are required. Mouse ears at corners or brim highly suggested to avoid warping. The rest of the settings can be kept at your slicer default 0.2mm profile.
PLA may work but was not tested, nor do I suggest it.