Thin body Fountain Pen concept for Hongdian No.5 Nib.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Fountain Pen design intended to reduce the diameter and the need for threads.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Having lost my spare nibs I decided to buy some new ones - This time the Hongdian No.5 - which also meant designing an entirely new body.
I used the nib section designed by bmingst_2841263 as a basis since its an elegant design, which is why I've marked this one a remix.
Apparently, I suck at making anything with threads so I wanted to minimise their use, while at the same time reducing the diameter of the barrel and still providing a durable usable pen.
What I've ended up with is something more like the disposable fountain pen released by Pilot, with a Friction Fit lid, but with a replaceable ink cartridge.
With a diameter of 12.5mm - this pen suits a more delicate style that doesn't need much pressure on the page and gives a smooth write.
Of course, its also a prototype, so while I've been using it for a few days now, I still don't know how its going to hold up - I printed mine with a high hexagonal 80% infill because I wanted it to be durable.
I've also integrated a really simple roll stop into the lid.
You may need to sand the body or the interior of the lid down just a fraction to give a slightly less tight fit.
Print the sections as already orientated, using tree supports for the body.
Printed mine with a .4 Nozzle and .1mm Layer Resolution.
Designed in Tinkercad
Printed on a Flashforge Adventurer 5M
Happy Writing!
13/08/2026 - Edit - Added a thicker more robust thread to the body/shell.
