CYD 2.8" case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CYD 2.8" case for a clear Lexan backplate there is room for a battery and extra modules.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom-built 3D-printable enclosure designed to house an integrated electronics stack for RC telemetry, tracking, or smart display projects. The compact, vertical case features precise alignment cutouts, dedicated internal spacing, and robust screw-down corner pillars for secure assembly.
Key Features
ESP32-Based Development Board: Fits standard modules (like the ESP32-32E) for Wi-Fi and Bluetooth connectivity.
Integrated Display Support: Optimized for a 2.8" 240x320 resistive touch LCD panel.
Expandable Module Space: Built-in room to secure extra hardware like the GNSS/GPS module.
Dedicated Battery Compartment: Lower cavity accommodates a rechargeable LiPo battery.
External Access Ports: Side-facing cutouts provide clean routing for USB power, sd card, and peripheral wiring.
Ghost LED Accent: Central layout to show your cyd in the dark while lighting up the ghost
Print Settings
Material: PLA+ or PETG (PETG recommended for outdoor/RC use)
Infill: 100%
Supports: Organic / Buildplate only (depending on orientation)
Orientation: face down for main frame, ghost face up.